East Lake ArmoryRequest a quote

Services & pricing

Eight service lines. One shop rate: $72/hr.

Flat-rate labor, quoted in full at intake before any work begins. Parts are billed separately, never above MSRP, plus shipping and applicable tax. Every firearm is returned with a written inspection record.

01

Reliability & Tuning Package

A complete, fixed-scope service for the most common feeding, extraction and ejection complaints on semi-automatic pistols, rifles and shotguns.

Scope: Field strip, detailed inspection and ultrasonic cleaning · feed ramp inspection and polish · barrel and chamber assessment · extractor fitting, tension and tuning · breech face and firing pin channel polish · ejection port and case-clearance check · function check.

Reliability & Tuning PackageFull inspection through function check$155
02

Cleaning, Inspection & Preservation

Standard and deep-clean service, returned with a written inspection record: wear noted, work performed and condition on return.

Standard clean & oilFull strip, cleaning of all parts, wear inspection$55
Deep clean — handgunComplete disassembly; ultrasonic where applicable$85
Deep clean — long gunFull teardown. Ultrasonic for barrels up to 20 inches$125
Bore / chamber polishCarbon and copper fouling removal$60
Finish care & polish workWood and metal furniture$72/hr
Light surface repairTouch-up, cold bluing and rust removal$72/hr
03

Fire Control & Action Work

Every trigger job gets a full safety check before it goes back to you.

Trigger installation & fittingRifle, shotgun and pistol; hand-fitted$65
Drop-in trigger installationSelf-contained unit, no fitting required; part billed separately$50
Sear / disconnector interfacePull weight measured and break characterized$85
Safety function & drop-safety checkChecks every safety for proper function$45
04

Barrel & Action Service

Pre-fit barrel installation, headspace verification and corrective work. Stuck cases and bore obstructions removed safely.

Headspace verificationStand-alone check; included with every barrel installation$45
Barrel installation (pre-fit)Installed, timed and headspaced$120
Lap in bolt lugsEven lug contact. Barrel setback not included$60
Remove stuck fired caseStandard extraction methods$70
Remove bore obstruction$72/hr
05

Sights & Optics

Scope, red dot and iron sight installation, leveled and aligned.

Scope mounting, base & rings$60
Ring lapping & scope levelingIncludes reticle cant correction$55
Bore sightingLaser; 25, 36 or 50 yards$25
Drill & tap for sights / baseFirearm assessed at intake as able to accept mounted hardware$35 / hole
Install sight in existing dovetailInstallation only; no dovetail cutting$35
06

Zeroing & Field Verification

Zero confirmed at the distance you choose, so the firearm leaves with a verified point of impact. Customer supplies the ammunition.

Sight-in / zero confirmation5–10 rounds at 25, 36 or 50 yards, your choice$65
Optic plus iron sightsCo-witness verified$85
07

Custom Builds & Assembly

Three popular platforms, built right and backed by the warranty. Optic installation is not included in any build.

AR-pattern

Complete AR-pattern buildComplete upper ($80) + complete lower ($70)$150
Assemble complete upperFrom parts kit$80
Assemble complete lowerFrom parts kit$70
Install aftermarket trigger (AR)Part billed separately$65
Install handguard / free-floatPart billed separately$80

Glock-pattern

Glock-pattern buildSlide and frame assembly$150
Aftermarket component fittingFit and function tested$65
Slide / frame fitting$75

Precision rifle (Remington 700 pattern)

Precision rifle buildPre-fit barrel$275
Install pre-fit barrel (customer-supplied)Headspace verification included$120
Headspace verification & setGo / no-go gauges$45
Trigger install & setPart billed separately$90
Glass / skim beddingAction and recoil lug$175
08

Transfers & Compliance

Standard and NFA transfers and ATF remanufacture documentation, handled under our FFL/SOT.

Basic transferPer firearm$15
FFL-to-FFL transfer (by mail)Per firearm; shipping quoted at intake$30 + shipping
NFA transfer (Form 3 / Form 4)Plus applicable tax stamp$30
Remanufacture documentationRecorded and documented in compliance with ATF requirements$85
Courtesy discounts

Law enforcement, veterans and first responders.

Turnaround & warranty

About one week on work that needs no additional parts, confirmed at intake. 90-day limited workmanship warranty on labor; parts carry their manufacturer’s warranty.

Referred work

Lathe and mill work (chambering from a blank, cutting and crowning barrels, action truing, tenon threading, cutting dovetails) is identified at intake and referred out before any price is quoted.

Coming 2027–2028

Finishing capability

New finishing services as each one comes online.

PLANNEDHot bluingFull 5-stage, long-gun capable
PLANNEDAnodizingVarious colors
PLANNEDSandblastingMaterial and parts stripping
PLANNEDRefinishingLimited repainting

Request a quote

Tell us what you need.

Send a message, or call or text the shop. Standard services are quoted straight from the price list; anything else is quoted before work begins.

Call or text
(407) 499-0347
Email
EastLakeArmory@gmail.com
Shop
East Lake Armory LLC · St. Cloud, Florida
Turnaround & warranty
About one week on work needing no extra parts · 90-day limited workmanship warranty