Services & pricing
Eight service lines. One shop rate: $72/hr.
Flat-rate labor, quoted in full at intake before any work begins. Parts are billed separately, never above MSRP, plus shipping and applicable tax. Every firearm is returned with a written inspection record.
Reliability & Tuning Package
A complete, fixed-scope service for the most common feeding, extraction and ejection complaints on semi-automatic pistols, rifles and shotguns.
Scope: Field strip, detailed inspection and ultrasonic cleaning · feed ramp inspection and polish · barrel and chamber assessment · extractor fitting, tension and tuning · breech face and firing pin channel polish · ejection port and case-clearance check · function check.
| Reliability & Tuning PackageFull inspection through function check | $155 |
Cleaning, Inspection & Preservation
Standard and deep-clean service, returned with a written inspection record: wear noted, work performed and condition on return.
| Standard clean & oilFull strip, cleaning of all parts, wear inspection | $55 |
| Deep clean — handgunComplete disassembly; ultrasonic where applicable | $85 |
| Deep clean — long gunFull teardown. Ultrasonic for barrels up to 20 inches | $125 |
| Bore / chamber polishCarbon and copper fouling removal | $60 |
| Finish care & polish workWood and metal furniture | $72/hr |
| Light surface repairTouch-up, cold bluing and rust removal | $72/hr |
Fire Control & Action Work
Every trigger job gets a full safety check before it goes back to you.
| Trigger installation & fittingRifle, shotgun and pistol; hand-fitted | $65 |
| Drop-in trigger installationSelf-contained unit, no fitting required; part billed separately | $50 |
| Sear / disconnector interfacePull weight measured and break characterized | $85 |
| Safety function & drop-safety checkChecks every safety for proper function | $45 |
Barrel & Action Service
Pre-fit barrel installation, headspace verification and corrective work. Stuck cases and bore obstructions removed safely.
| Headspace verificationStand-alone check; included with every barrel installation | $45 |
| Barrel installation (pre-fit)Installed, timed and headspaced | $120 |
| Lap in bolt lugsEven lug contact. Barrel setback not included | $60 |
| Remove stuck fired caseStandard extraction methods | $70 |
| Remove bore obstruction | $72/hr |
Sights & Optics
Scope, red dot and iron sight installation, leveled and aligned.
| Scope mounting, base & rings | $60 |
| Ring lapping & scope levelingIncludes reticle cant correction | $55 |
| Bore sightingLaser; 25, 36 or 50 yards | $25 |
| Drill & tap for sights / baseFirearm assessed at intake as able to accept mounted hardware | $35 / hole |
| Install sight in existing dovetailInstallation only; no dovetail cutting | $35 |
Zeroing & Field Verification
Zero confirmed at the distance you choose, so the firearm leaves with a verified point of impact. Customer supplies the ammunition.
| Sight-in / zero confirmation5–10 rounds at 25, 36 or 50 yards, your choice | $65 |
| Optic plus iron sightsCo-witness verified | $85 |
Custom Builds & Assembly
Three popular platforms, built right and backed by the warranty. Optic installation is not included in any build.
AR-pattern
| Complete AR-pattern buildComplete upper ($80) + complete lower ($70) | $150 |
| Assemble complete upperFrom parts kit | $80 |
| Assemble complete lowerFrom parts kit | $70 |
| Install aftermarket trigger (AR)Part billed separately | $65 |
| Install handguard / free-floatPart billed separately | $80 |
Glock-pattern
| Glock-pattern buildSlide and frame assembly | $150 |
| Aftermarket component fittingFit and function tested | $65 |
| Slide / frame fitting | $75 |
Precision rifle (Remington 700 pattern)
| Precision rifle buildPre-fit barrel | $275 |
| Install pre-fit barrel (customer-supplied)Headspace verification included | $120 |
| Headspace verification & setGo / no-go gauges | $45 |
| Trigger install & setPart billed separately | $90 |
| Glass / skim beddingAction and recoil lug | $175 |
Transfers & Compliance
Standard and NFA transfers and ATF remanufacture documentation, handled under our FFL/SOT.
| Basic transferPer firearm | $15 |
| FFL-to-FFL transfer (by mail)Per firearm; shipping quoted at intake | $30 + shipping |
| NFA transfer (Form 3 / Form 4)Plus applicable tax stamp | $30 |
| Remanufacture documentationRecorded and documented in compliance with ATF requirements | $85 |
Law enforcement, veterans and first responders.
About one week on work that needs no additional parts, confirmed at intake. 90-day limited workmanship warranty on labor; parts carry their manufacturer’s warranty.
Lathe and mill work (chambering from a blank, cutting and crowning barrels, action truing, tenon threading, cutting dovetails) is identified at intake and referred out before any price is quoted.
Coming 2027–2028
Finishing capability
New finishing services as each one comes online.

Request a quote
Tell us what you need.
Send a message, or call or text the shop. Standard services are quoted straight from the price list; anything else is quoted before work begins.
- Call or text
- (407) 499-0347
- EastLakeArmory@gmail.com
- Shop
- East Lake Armory LLC · St. Cloud, Florida
- Turnaround & warranty
- About one week on work needing no extra parts · 90-day limited workmanship warranty